Hidrolik Cairan Power Connection Winner 37 ° Flared Panyambungna / adaptor
Bubuka produk
Brand Winner 37 ° konektor flared / adaptor minuhan tur ngaleuwihan ISO 8434-2 sambungan tube logam pikeun kakuatan cairan sarta pamakéan umum - Bagian 2: 37 ° flared syarat panyambungna jeung kinerja.Peunteun tekanan langkung luhur tibatan ISO 8434-2.
Panyambungna flared 37 ° cocog pikeun dianggo sareng tabung ferrous sareng non-ferrous kalayan diaméter luar tina 6 mm dugi ka 50,8 mm inklusif.Panyambungna ieu nyadiakeun sambungan aliran pinuh ku logam-to-logam sealing dina sistem hidrolik operasi ka tekanan gawé ditémbongkeun dina tabel handap sakumaha ukuran tube.
| Diaméter luar pipah OD | Ketebalan dinding tabung pikeun flaring | Tekanan gawé MPa | ||
| métrik mm | Inci in | tabung métrik mm | Tabung inci mm | baja karbon jeung beusi sténless |
| 6 | 1/4 | 1.5 | 1.65 | 35 |
| 8 | 5/16 | 1.5 | 1.65 | 35 |
| 10 | 3/8 | 1.5 | 1.65 | 35 |
| 12 | 1/2 | 2 | 2.1 | 31 |
| 16 | 5/8 | 2.5 | 2.41 | 24 |
| 20 | 3/4 | 3 | 2.76 | 24 |
| 25 | 1 | 3 | 3.05 | 21 |
| 30 | 1 1/4 | 3 | 3.05 | 17 |
| 38 | 1 1/2 | 3 | 3.05 | 14 |
| 50 | 2 | 3.5 | 3.4 | 10.5 |
Duanana métrik jeung inci tubing bisa diakomodir ku cara ngarobah leungeun baju ningali lambar katalog NB300 leungeun baju keur tube inci sarta leungeun baju NB500 pikeun tube métrik.Pikeun desain anyar sareng anu bakal datang, panggunaan pipa métrik langkung dipikaresep.
Éta dimaksudkeun pikeun sambungan tabung sareng fitting selang ka palabuhan saluyu sareng ISO 6149-1, ISO 1179-1 sareng ISO 9974-1 sareng ISO 11926-1.Sarta dina rarancang anyar dina aplikasi kakuatan cairan, stud ends luyu jeung ISO 1179-3 jeung ISO 9974-2 jeung ISO 11926-3 teu kudu dipaké, diménsi pikeun tungtung stud wajib luyu jeung ISO 6149-3.
Gambar di handap ieu nunjukkeun bagian silang sareng komponenana konektor flared 37 °.
Key
1 Awak konektor stud lempeng
2 pipahnut
3 pipah
4 leungeun baju
5O-cingcin
aStud tungtung luyu jeung ISO 6149-3, ISO 1179-3, ISO 9974-2 atanapi ISO 11926-3.
Handap gambar nembongkeun bagian cross sareng komponenana a 37 ° panyambungna jalu jeung bikang has, tekanan cocog tingali handap tabel.
| Ukuran | Benang | Peunteun tekanan |
| 1J-04 | 7/16" x 20UNF | 58.6 |
| 1J-05 | 1/2" x 20 UNF | 58.6 |
| 1J-06 | 9/16" x 18UNF | 48.3 |
| 1J-08 | 3/4" x 16UNF | 41.4 |
| 1J-10 | 7/8" x 14UNF | 37.9 |
| 1J-12 | 1.1/16" x 12UN | 27.6 |
| 1J-16 | 1.5/16" x 12UN | 24.1 |
| 1J-20 | 1.5/8" x 12UN | 24.1 |
| 1J-24 | 1.7/8" x 12UN | 14.5 |
| 1J-32 | 2.1/2" x 12UN | 12.1 |
| 2J-04 | 7/16" x 20UNF | 58.6 |
| 2J-05 | 1/2" x 20 UNF | 48.3 |
| 2J-06 | 9/16" x 18UNF | 48.3 |
| 2J-08 | 3/4" x 16UNF | 41.4 |
| 2J-10 | 7/8" x 14UNF | 37.9 |
| 2J-12 | 1.1/16" x 12UN | 27.6 |
| 2J-16 | 1.5/16" x 12UN | 24.1 |
| 2J-20 | 1.5/8" x 12UN | 24.1 |
| 2J-24 | 1.7/8" x 12UN | 14.5 |
| 2J-32 | 2.1/2" x 12UN | 12.1 |
Nomer Produk
| Uni |  1J |  1J9 |  AJ | |||||
| UN tungtung |  1JO |  1JO-L |  1JO4-OG |  1JO9-OG |  1JO9-OGL |  AJJO-OG |  AJOJ-OG |  1 JF |
| Métrik stud tungtung |  1JH-N |  1JH9-OGN |  AJHJ-OGN |  AJJH-OGN |  1 JM |  1 JM-WD |  1JK | |
| tungtung BSP |  1JG |  1JG-L |  1JG9-OG |  AJGJ-OG |  AJJG-OG |  1JB-WD |  1JS | |
 5JB |  5JB-G |  5JB-GDK | ||||||
| Flange |  1JFL |  1JFL9 |  1JFS |  1JFS9 | ||||
| tungtung NPT |  1 JN |  1JN9 |  1JN9-L |  1JN9-LL |  AJJN |  AJNJ |  KJNJ |  LJJN |
 HNNJ |  JNJN |  KJNN |  LJNN |  5 JN |  5JN-BH |  5JN-BHLN |  5JN9 | |
| tungtung BSPT |  1 JT-SP |  1JT4-SP |  1JT9-SP |  AJJT-SP |  AJTJ-SP |  5 JT |  5 JT9 | |
| Las on |  1JW |  1JW9-IN | ||||||
| Buckhead |  6J |  6J-LN |  6J9 |  6J9-LN |  6NJ |  6NJ-LN | ||
 AJ6JJ |  AJ6JJ-LN |  AJJ6J |  AJJ6J-LN | |||||
| Nyolok |  4J |  9J |  9J-KAP | |||||
| Awéwé |  2J |  2J4 |  2J9 |  BJ |  CJ |  DJ |  EJ |  3J |
 2NJ |  2NJ9 |  2OJ |  2 MJ |  2 TJ-SP |  2GJ |  2 JF |  2JB | |
 5J |  EJNJ | |||||||
| Nut jeung leungeun baju |  NB200 |  NB300 |  NB500 |